DC 24V 10W Power High Safety Astatic Shock Industrial Static Eliminator Ion Bar
1, General
AP-AB1216 Air source AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, plastics, chemicals, printing, textile, optical and other industries.
2, Features
◆ Specification
Model No. | AP-AB1216 |
Input Voltage | DC 24V |
Input current | <600mA |
Power | 10W |
Working Voltage | ±5000V |
Working method | Pulse AC |
Emitter electrode | SUS |
Discharge structure | Resistance coupling |
Output frequency | 1,3,5,10,20,30,50Hz;(Factory setting:30Hz) |
Duty Ratio | 10%—90% |
Working range | L*W*H:{385-410(Probe distance 25mm);460-2960(Probe distance 50mm)}*300*1000mm |
Working distance | 100→1000mm |
Ion balance | ≤|±30V|(AVE) |
Discharge speed | ≤2S |
Warning indicate | Power input indicator,High Voltage indicator(Green is normal,Red is abnormal) |
Status monitoring | Series network monitoring / wireless monitoring |
Airflow pressure | ≤0.6MPa |
air source connector With throttle valve | Φ8-G1/8 Black |
Working temperature | 0℃-50℃ |
Working humidity | <70% |
Dimension | L*W*H:{385-410(Probe distance25mm);460-2960(Probe distance50mm)}*35*78.4mm |
Bar body material | Flame retardant PVC,ABS,AL,SUS |
Accessories | Flexible 180° install bracket |
Power adapter | GRT-240200: DC24V 2A,Dual network port output,123*61*40.5mm(L*W*H) |
Power adapter cable length | 2.5m |
Warranty | 1 Year |
Certificate | CE |
2 | Static removing performance decline obviously | Pollute or damage of discharge pin | Clean or replace discharge pin |
Electrode pad not tightly screwed | Be sure the electrode pad screwed tightly | ||
Improper installation position | Confirm the optimum installation position | ||
3 | Static removing performance decline | There are conductor or other ion bar around | Remove conductor or other ion bar |
4 | HV Alarm | Electromagnetic disturb | Switch off and reset |
Abnormal discharge | Check installation position and be away from conductors | ||
Pollute or damage of discharge pin | Send back to manufacturer | ||
5 | Smoking or burning | Pollute or damage of discharge pin or electrode pad insulator | Send back to manufacturer |